Configure Ripng Updatetime - Extreme Networks ExtremeWare XOS Command Reference Manual

Software version 11.5

Hide thumbs Also See for ExtremeWare XOS:

Table of Contents

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.

configure ripng updatetime

configure ripng updatetime <seconds>

Specifies the time interval in seconds within which RIPng sends update packets.

Syntax Description

Specifies a time in seconds. The range is 10 to 3600.

Usage Guidelines

The router exchanges an update message with each neighbor every 30 seconds (default value), or if

there is a change to the overall routed topology (also called triggered updates). The timer granularity is 10

seconds. Timer minimum is 10 second and maximum is 3600 seconds.

The following command sets the update timer to 60 seconds:

configure ripng updatetime 60

This command was first available in ExtremeWare XOS 11.2.

Platform Availability

This command is available on all platforms.

ExtremeWare XOS 11.5 Command Reference Guide

Extremeware xos 11.5