Extreme Networks ExtremeWare XOS Command Reference Manual page 1855

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
Global Packet Statistics (In/Out)
C-RP-Advs 0
Registers 0
RegisterStops 0
VLAN Cid IP Address
side 3 21.1.1.2
v1 1 10.1.1.1
v2 2 12.1.1.1
Legend: J/P Int: Join/Prune Interval
Flags : r - Router PIM Enabled, i - Interface PIM Enabled, f - Interface,
Forwarding Enabled, m - Interface Multicast Forwarding Enabled,
s - Sparse mode, d - Dense mode, c - CRP enabled,
t - Trusted Gateway configured, n - Multinetted VLAN,
p - Passive Mode, S - Source Specific Multicast.
The following command displays the detailed PIM configuration and statistics:
show pim detauk
The following is sample output from the command:
PIM Enabled, Version 2
PIM CRP Disabled
BSR state : ACCEPT_ANY ; BSR Hash Mask Length: 255.255.255.252
Current BSR Info : 0.0.0.0 (Priority 0)
Configured BSR Info : 0.0.0.0 (Priority 0)
CRP Adv Interval : 60 sec ; CRP Holdtime: 150
BSR Interval : 60 sec ; BSR Timeout : 130
Cache Timer : 210 sec ; Prune Timer : 210
Assert Timeout : 210 sec ; Register Suppression Timeout,Probe: 60, 5
Generation Id : 0x42dc282b
Threshold for Last Hop Routers: 0 kbps
Threshold for RP
Register-Rate-Limit-Interval
PIM SSM address range
Register Checksum to include data
Active Sparse Ckts 3 Dense Ckts 0
Global Packet Statistics (In/Out)
C-RP-Advs 0
Registers 0
RegisterStops 0
PIM SPARSE Interface[3] on VLAN side is enabled and up
IP adr: 21.1.1.2
Passive
Hello Interval
Neighbor Time out
Join/Prune Interval
Join/Prune holdtime
Trusted Gateway
CRP group List
Shutdown priority
ExtremeWare XOS 11.5 Command Reference Guide
0
0
0
Designated
Router
/24 21.1.1.2
/24 10.1.1.3
/24 12.1.1.1
: 0 kbps
: Always active
: 232.0.0.0/8
0
0
0
mask: 255.255.255.0
: No
: 30 sec
: 105 sec
: 60 sec
: 210 sec
: none
: none with priority 0
: 1024
Flags Hello
Int
rifms----S 30
rifms--n-S 30
rifms----S 30
DR of the net: 21.1.1.2
show pim
J/P Nbrs
Int
60 1
60 1
60 0
1855