Configure Vlan Router-Discovery Min-Interval - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.

configure vlan router-discovery min-interval

configure vlan <vlan_name> router-discovery {ipv6} min-interval
<mininterval>
Description
Configures the minimum time between unsolicited router discovery advertisements on the VLAN.
Syntax Description
vlan_name
mininterval
Default
200 seconds, or max-interval * .33 (see guidelines)
Usage Guidelines
This command configures the minimum amount of time before an unsolicited router advertisement
message is advertised over the links corresponding to the VLAN.
The minimum value is 3 seconds. The maximum time is (.75 * max-interval) seconds. If you do not
explicitly set this value, the min-interval value is reset whenever the max-interval is configured. Min-
interval will then be dynamically adjusted to .33 times the max-interval.
Example
The following command configures the min-interval to be 300 seconds for the VLAN top_floor:
configure vlan top_floor router-discovery min-interval 300
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on all platforms.
ExtremeWare XOS 11.5 Command Reference Guide
Specifies an IPv6 configured VLAN.
Specifies the minimum time between advertisements, in seconds. Range is 3
to 1350 (see guidelines).
configure vlan router-discovery min-interval
1439