Enable Clear-Flow - Extreme Networks ExtremeWare XOS Command Reference Manual

Software version 11.5

Hide thumbs Also See for ExtremeWare XOS:

Table of Contents

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.

enable clear-flow

Enable the CLEAR-Flow agent.

Syntax Description

This command has no arguments or variables.

CLEAR-Flow is disabled by default.

Usage Guidelines

When the CLEAR-Flow agent is enabled, sampling begins and actions are taken based on the CLEAR-

Flow rules that are configured on the switch.

The following example enables CLEAR-Flow on the switch:

enable clear-flow

This command was first available in ExtremeWare XOS 11.1.

Platform Availability

This command is available on the BlackDiamond 10808 and BlackDiamond 12804 platforms only.

ExtremeWare XOS 11.5 Command Reference Guide

Extremeware xos 11.5