Unconfigure Radius-Accounting - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
Security Commands

unconfigure radius-accounting

unconfigure radius-accounting {mgmt-access | netlogin} {server [primary |
secondary]}
Description
Unconfigures the RADIUS accounting server configuration.
Syntax Description
mgmt-access
netlogin
primary
secondary
Default
Unconfigures both the primary and secondary accounting servers for management and network login.
Usage Guidelines
If you do not specify any keywords, this command unconfigures both the primary and secondary
accounting servers for management and network login.
The following list describes the available keywords:
●
mgmt-access
functions.
—Use this keyword to unconfigure only the accounting server(s) for network login.
●
netlogin
—Use this keyword to specify only the primary RADIUS accounting sever.
●
primary
●
secondary
Example
The following command unconfigures the secondary RADIUS accounting server settings for both
management and network login:
unconfigure radius-accounting server secondary
The following command unconfigures the secondary RADIUS accounting server settings for only
network login:
unconfigure radius-accounting netlogin server secondary
The following command unconfigures all RADIUS accounting server settings for only management
functions:
unconfigure radius-accounting mgmt-access
1042
Specifies the switch management RADIUS accounting server.
Specifies the network login RADIUS accounting server.
Unconfigures the primary RADIUS accounting server.
Unconfigures the secondary RADIUS accounting server.
—Use this keyword to unconfigure only the accounting server(s) for management
—Use this keyword to specify only the secondary RADIUS accounting server.
ExtremeWare XOS 11.5 Command Reference Guide