Configure Rip Add Vlan - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.

configure rip add vlan

configure rip add vlan [<vlan-name> | all]
Description
Configures RIP on an IP interface.
Syntax Description
vlan-name
all
Default
N/A.
Usage Guidelines
When an IP interface is created, RIP configuration is disabled on the interface by default. When the RIP
interface is disabled, the parameters are not reset to default automatically.
Example
The following command configures RIP on the VLAN finance:
configure rip add finance
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
ExtremeWare XOS 11.5 Command Reference Guide
Specifies a VLAN name.
Specifies all VLANs.
configure rip add vlan
1465