Configure Bgp Restart Update-Delay - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.

configure bgp restart update-delay

configure bgp restart update-delay
configure bgp restart update-delay <seconds>
Description
Configures the update delay timer used with graceful BGP restart. This is the maximum time to delay
updating BGP routes to the local IP route table.
Syntax Description
seconds Specifies the stale route time. The range is 1 to 3600 seconds.
Default
The default is 600 seconds
Usage Guidelines
This command configures the update delay timer. Usually, a restarting router waits to receive EOR
messages from all the receiving BGP neighbors before it starts the route update. Otherwise, it will do
the route selection when the timer expires.
Example
The following command configures the graceful BGP update delay timer:
configure bgp restart update-delay 800
History
This command was first available in ExtremeWare XOS 11.4.
Platform Availability
This command is available on platforms with a Core or an Advanced Core license.
1731
ExtremeWare XOS 11.5 Command Reference Guide