Extreme Networks ExtremeWare XOS Command Reference Manual page 1303

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
configure vrrp vlan vrid advertisement-interval
In the following example, the configured advertisement interval is set to 999; however, the
keyword is missing. Since the switch uses the seconds interval by default, and 999 is out
milliseconds
of the seconds range, the switch displays an error message similar to the following:
configure vrrp blue vrid 250 advertisement-interval 999
Error: Advertisement interval must be between 1 and 255 seconds. 999 out of range
If you configure an out of range milliseconds interval, the switch displays an error message similar to
the following:
configure vrrp blue vrid 2 advertisement-interval 1000 milliseconds
Error: Advertisement interval must be between 100 and 999 milliseconds. 1000 out of
range.
Example
The following command configures the advertisement interval of 15 seconds:
configure vrrp vlan vrrp-1 vrid 1 advertisement-interval 15
The following command configures the advertisement interval of 200 milliseconds:
configure vrrp vlan vrrp-1 vrid 1 advertisement -interval 200 milliseconds
History
This command was first available in ExtremeWare XOS 10.1.
The and keywords were added in ExtremeWare XOS 11.5.
milliseconds seconds
Platform Availability
This command is available on all platforms.
1303
ExtremeWare XOS 11.5 Command Reference Guide