Show Neighbor-Discovery Cache Ipv6 - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
IPv6 Unicast Commands

show neighbor-discovery cache ipv6

show neighbor-discovery cache ipv6 {[<ipv6_addr> | <mac> | permanent] {vr
<vr_name>} | vlan <vlan_name> | vr <vr_name>}
Description
Deletes a static entry from the neighbor cache.
Syntax Description
vr_name
mac
permanent
ipv6_addr
vlan_name
Default
N/A.
Usage Guidelines
This command displays the entries present in the neighbor cache.
The entries displayed can be filtered by IPv6 address, MAC address, or by VLAN. The
keyword filters the output to display static entries.
The
vr_name
operation applies to VR-Default.
Example
The following command shows all entries from the neighbor cache:
show neighbor-discovery cache ipv6
The following is sample output:
VR
VR-Default
VR-Default
VR-Default
1458
Specifies a virtual router.
Specifies a MAC address.
Specifies static entries.
Specifies an IPv6 address.
Specifies an IPv6 configured VLAN.
indicates the virtual router on which the operation is performed. In its absence, the
Destination
Mac
3ffe:100::7
00:01:30:00:6b:00
3ffe:100::99
00:01:02:33:33:33
3ffe:99::99
00:01:02:01:01:01
Age Static VLAN
0 NO gtag100
0 YES gtag100
0 YES gtag99
ExtremeWare XOS 11.5 Command Reference Guide
permanent
VID Port
100 1:2
100
99