Configure Mld Snooping Vlan Ports Delete Static Group - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
IPv6 Multicast Commands

configure mld snooping vlan ports delete static group

configure mld snooping {vlan} <vlanname> ports <portlist> delete static
group [all | <v6grpipaddress>]
Description
Removes the configuration that causes VLAN ports to receive the traffic from a multicast group, even if
no MLD joins have been received on the port.
Syntax Description
vlanname
portlist
all
v6grpipaddress
Default
None.
Usage Guidelines
Use this command to delete a static group from a particular VLAN port.
To add a static group, use the following command:
configure mld snooping {vlan} <vlanname> ports <portlist> add static
group <v6grpipaddress>
Example
The following command removes a static MLD entry so the multicast group ff02::a:b will not be
forwarded to VLAN marketing on ports 2:1-2:4, unless an MLD join message is received on the port:
configure mld snooping marketing ports 2:1-2:4 delete static group ff02::a:b
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on all platforms.
1870
Specifies a VLAN name.
Specifies one or more ports or slots and ports. On a modular switch, it can be
a list of slots and ports. On a stand-alone switch, it can be one or more port
numbers. In the form 1, 2, 3-5, 2:5, 2:6-2:8.
Specifies all multicast groups.
Specifies the multicast group IPv6 address.
ExtremeWare XOS 11.5 Command Reference Guide