Extreme Networks ExtremeWare XOS Command Reference Manual page 2008

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
Added, Modified, and Deleted Commands
ExtremeWare XOS Release 11.3 Command Changes
The changes captured here are changes from the first release of ExtremeWare XOS 11.2 (release number
11.2.2.4), to the first release of ExtremeWare XOS 11.3 (release number 11.3.1.3).
New Commands for Release 11.3
The following are the commands that were added for ExtremeWare XOS release 11.3:
clear counters ports
clear lacp counters
configure access-list add
configure access-list delete
configure netlogin local-user
configure netlogin ports mode
configure ospf restart
configure ospf restart grace-period
configure ospf restart-helper
configure power supply
configure sharing lacp system-priority
configure sys-recovery-level slot
create access-list
delete access-list
disable ospf restart-helper-lsa-check
enable dos-protect simulated
enable ospf restart-helper-lsa-check
restart process
show access-list dynamic
show access-list dynamic counter
show access-list dynamic rule
show lacp
show lacp lag
show lacp member-port
show ports utilization
Modified Commands for Release 11.3
The following are the commands that had keywords added for ExtremeWare XOS release 11.3:
clear access-list counter
configure access-list
configure netlogin add mac-list
create netlogin local-user
enable sharing grouping
reboot
show access-list
show access-list counter
show fdb
show ports collisions
show ports configuration
show ports packet
show ports qosmonitor
show ports rxerrors
2008
ExtremeWare XOS 11.5 Command Reference Guide