Configure Vrrp Vlan Vrid Delete Track-Iproute - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
VRRP Commands

configure vrrp vlan vrid delete track-iproute

configure vrrp vlan <vlan_name> vrid <vridval> delete track-iproute
<ipaddress>/<masklength>
Description
Deletes a tracking entry for the specified route.
Syntax Description
vlan_name
vridval
ipaddress
masklength
Default
N/A.
Usage Guidelines
Deleting a tracking entry while VRRP is enabled causes the VRRP VRs state to be re-evaluated for
failover.
Example
The following command disables tracking of routes to the specified subnet for VLAN vlan-1:
configure vrrp vlan vlan-1 vrid 1 delete track-iproute 3.1.0.0/24
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
1306
Specifies the name of a VRRP VLAN.
Specifies the VRRP virtual router ID of the target virtual router. Value can be
in the range of 1-255.
Specifies the prefix of the route to track.
Specifies the length of the route's prefix.
ExtremeWare XOS 11.5 Command Reference Guide