Extreme Networks ExtremeWare XOS Command Reference Manual page 1063

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
You might be attempting to modify a local netlogin account that is not present or the switch, or you
might have incorrectly entered the account name. To confirm the names of the local netlogin accounts
on your switch, use the following command:
show netlogin local-users
Additional Requirements. This command applies only to the web-based and MAC-based modes of
network login. 802.1x network login does not support local database authentication.
You must have administrator privileges to use this command. If you do not have administrator
privileges, the switch displays a message similar to the following:
This user does not have permissions for this command.
Passwords are case-sensitive. Passwords must have a minimum of 0 characters and a maximum of 32
characters. If you attempt to create a password with more than 32 characters, the switch displays the
following message after you re-enter the password:
Password cannot exceed 32 characters
Example
This section contains the following examples:
Updating the password
●
Modifying destination VLAN attributes
●
Updating the Password. The following example updates the password of an existing local netlogin
account:
configure netlogin local-user megtest
After you enter the local netlogin user name, press [Enter]. The switch prompts you to enter a
password; however, the switch does not display the password. At the prompt enter the new password:
password:
After you enter the new password, press [Enter]. The switch then prompts you to re-enter the password:
Reenter password:
Updating VLAN Attributes. You can add a destination VLAN, change the destination VLAN, or remove
the destination from an existing local netlogin account. This example changes the destination VLAN for
the specified local netlogin account:
configure netlogin local-user megtest vlan-vsa green
History
This command was first available in ExtremeWare XOS 11.3.
Platform Availability
This command is available on all platforms.
ExtremeWare XOS 11.5 Command Reference Guide
configure netlogin local-user
1063