ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
Listening ports
●
Test requests(from ANS)—Number of tests that the CNA Agent was requested to run by the
■
Adaptive Networking Software (ANS) on the CNA Server
RTP test requests(from test plugs)—Number of RTP streams that the CNA Agent initiates
■
RTP and Traceroute responses(from test plugs)—Number of responses by the CNA Agent to
■
requests for RTP and Traceroute tests
Last Test—Last test that CNA Agent performed
●
Result Last Test—Results of the last test, which the CNA Agent sends to the CNA Server
●
Test—Tests run by the CNA Agent
●
Count—Number of tests successfully run
●
Example
The following command displays CNA Agent statistics and connection status on the BlackDiamond
10808 switch:
show cna-testplug
HW Name: BlackDiamond 10808
Firmware Version: 11.3.0.4
Interface VLAN: "Default" on Virtual router "VR-Default"
IP address of the Interface:
CNA Testplug version: 3.0.1
Interface version with Scheduler:17
Admin: Enabled
Status: Registered
Errors: 29846
Total tests received: 58338
Scheduler (SBC): 10.203.128.123: 20000:
Listening ports
--Test requests(from ANS): 50000
--RTP test requests(from test plugs): 50001
--RTP and Traceroute responses(from test plugs): 50015
Last Test: Ping to
10.203.135.61
Result Last Test: ping results: rtt: 2.292000, loss: 0.000000
Results:
TEST
COUNT
----
------
Traceroute
65489
RTP
51403
Ping
101549
Tcpconnect
36455
Merge
50
The following command displays CNA Agent statistics and connection status on the Summit X450
series switch:
show cna
HW Name:
Firmware version:
Interface VLAN:
IP address of the Interface:
ExtremeWare XOS 11.5 Command Reference Guide
10.203.135.61
FAILED
------
0
0
0
0
0
SummitX450-24t
11.3.0.11
"Default" on Virtual router "VR-Default"
10.203.128.126
show cna-testplug
2001