Clear Netlogin State Mac-Address - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.

clear netlogin state mac-address

clear netlogin state mac-address
clear netlogin state mac-address <mac>
Description
Initialize/Reset the Network Login sessions for a specified supplicant.
Syntax Description
mac Specifies the MAC address of the supplicant.
Default
N/A.
Usage Guidelines
This command is essentially equivalent to a particular supplicant logging out. The MAC address will be
cleared from the FDB, the port is put back to its original VLAN (for Campus mode), and the port state
is set to unauthenticated, if this was the last authenticated MAC on this port.
Example
The following example resets the Network Login session for the supplicant with the MAC address of
00:e0:18:01:32:1f:
clear netlogin state mac-address 00:e0:18:01:32:1f
History
This command was first available in ExtremeWare XOS 11.1.
Platform Availability
This command is available on all platforms.
1051
ExtremeWare XOS 11.5 Command Reference Guide