Configure Iproute Delete Blackhole - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
IP Unicast Commands

configure iproute delete blackhole

configure iproute delete blackhole [<ipNetmask> | <ipaddress> <mask>] {vr
<vrname>}
Description
Deletes a blackhole address from the routing table.
Syntax Description
ipNetmask
ipaddress
mask
vrname
Default
If you do not specify a virtual router, the current virtual router context is used.
Usage Guidelines
None.
Example
The following command removes a blackhole address from the routing table:
configure iproute delete blackhole 100.101.145.4
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
1344
Specifies an IP address/mask length.
Specifies an IP address.
Specifies a netmask.
Specifies the virtual router to which the route is deleted.
ExtremeWare XOS 11.5 Command Reference Guide