Show Mpls Interface - Extreme Networks ExtremeWare Command Reference Manual

MPLS Commands—BlackDiamond Switch Only

show mpls interface

show mpls interface {ldp | targeted-ldp | rsvp-te}
Description
Displays targeted LDP and RSVP-TE interface information.
Syntax Description
ldp
targeted-ldp
RSVP-TE
Default
N/A.
Usage Guidelines
Displays targeted LDP and RSVP-TE interface information, including targeted LDP and RSVP-TE peer
IP address and peer state. Specifying the keyword
information displayed to only those interface types.
Example
The following command displays interface information for RSVP-TE interfaces:
show mpls interface rsvp-te
History
This command was first available in an ExtremeWare IP Technology Services Release based on
v6.1.8b12.
This command was subsequently incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on the BlackDiamond switch only.
2508
Specifies LDP interfaces.
Specifies targeted LDP interfaces.
Specifies RSVP-TE interfaces.
,
ldp targeted-ldp,
or limits the
rsvp-te
ExtremeWare 7.5 Command Reference Guide