Configure Bgp Restart - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
BGP Commands

configure bgp restart

configure bgp restart [none | planned | unplanned | both | aware-only]
Description
Configures the router as a graceful BGP restart router.
Syntax Description
none
planned
unplanned
both
aware-only
Default
The default is none; graceful restart is disabled.
Usage Guidelines
This command configures the router as a graceful BGP router. You can decide to configure a router to
enter graceful restart for only planned restarts, for only unplanned restarts, or for both. Also, you can
decide to configure a router to be a receiver only (which helps a restarting BGP router to perform the
graceful restart process), and not to do graceful restarts itself.
This command cannot be used while BGP is enabled globally on the switch.
Example
The following command configures a router to perform graceful BGP restarts only for planned restarts:
configure bgp restart planned
History
This command was first available in ExtremeWare XOS 11.4.
Platform Availability
This command is available on platforms with a Core or an Advanced Core license.
1726
Do not act as a graceful BGP restart router.
Only act as a graceful BGP restart router for planned restarts.
Only act as a graceful BGP restart router for unplanned restarts.
Act as a graceful BGP restart router for both planned and unplanned restarts.
Only act as a graceful BGP receiver (helper) router.
ExtremeWare XOS 11.5 Command Reference Guide