Interface Report
To view a report on the status of every port known to the EPICenter software, click the Interface
Report link in the left-hand panel.
Figure 196: Report on Device Ports (Interface Report; portion)
The information reported for each interface includes:
IP Address
IP address of the interface
Port
Port number of the interface
Port Name
Port name of the interface
AdminStatus
Interface administrative status (enabled/disabled)
OperStatus
Operational status of the interface (ready/active)
Configured Speed/Type
Nominal (configured) speed of the interface
Actual Speed/Type
Actual speed of the interface
FDB Polling
Whether the port is being actively polled as an edge port, or is not being polled. If the
port is not polled, the reason is included (Device Not Supported, Inactive Port, Not
Supported, Polling Disabled For Port, or Uplink Port)
EPICenter Reference Guide
Figure 196
shows a portion of an example output.
Slots, Stacks and Ports Reports
401
Need help?
Do you have a question about the EPICenter and is the answer not in the manual?