Extreme Networks ExtremeWare XOS Command Reference Manual page 1952

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
Troubleshooting Commands
memory card. On the Summit X450 family of switches, transfer the files from the internal memory card
to a TFTP server. This frees up space on the internal memory card while keeping the core dump files.
Modular Switches Only. Before you can enable and save debug information to the external memory card,
you must install an external compact flash memory card into the external compact flash slot of the
MSM. For more information about installing an external compact flash memory card, please refer to the
Extreme Networks Consolidated XOS Hardware Installation Guide.
After you use the command and manually remove the card from the external
eject memorycard
compact flash slot of the MSM, this setting is automatically changed to .
off
Example
The following example enables a modular switch to save debug information to the external memory
card:
configure debug core-dumps memorycard
The following example enables the switch to save debug information to the internal memory card:
configure debug core-dumps internal-memory
History
This command was first available in ExtremeWare XOS 11.1.
The parameter was added in ExtremeWare XOS 11.2.
internal-memory
Platform Availability
This command is available on all platforms.
1952
ExtremeWare XOS 11.5 Command Reference Guide