Extreme Networks ExtremeWare XOS Command Reference Manual page 1926

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
Configuration and Image Commands
Enter to use the updated configuration as the default configuration. Enter to cancel the operation
y n
and keep using the current default, active configuration.
Example
The following command saves the current switch configuration to the configuration file named XOS1:
save configuration XOS1
The following command save the current switch configuration to the secondary configuration file:
save configuration secondary
History
This command was first available in ExtremeWare XOS 10.1.
The status messages displayed by the switch were updated in ExtremeWare XOS 11.1.
Platform Availability
This command is available on all platforms.
1926
ExtremeWare XOS 11.5 Command Reference Guide