Disable Rip Aggregation - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
RIP Commands

disable rip aggregation

disable rip aggregation
Description
Disables the RIP aggregation of subnet information on a RIP version 2 (RIPv2) router.
Syntax Description
This command has no arguments or variables.
Default
RIP aggregation is disabled by default.
Usage Guidelines
The disable RIP aggregation command disables the RIP aggregation of subnet information on a switch
configured to send RIPv2-compatible traffic. The switch summarizes subnet routes to the nearest class
network route. The following rules apply when using RIP aggregation:
Within a class boundary, no routes are aggregated.
●
If aggregation is disabled, subnet routes are never aggregated, even when crossing a class boundary.
●
Example
The following command disables RIP aggregation on the interface:
disable rip aggregation
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
1478
ExtremeWare XOS 11.5 Command Reference Guide