Enable Ripng Triggerupdates - Extreme Networks ExtremeWare XOS Command Reference Manual

Software version 11.5

Hide thumbs Also See for ExtremeWare XOS:

Table of Contents

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.

enable ripng triggerupdates

enable ripng triggerupdates {vlan <vlan-name> | tunnel <tunnel_name> |

[vlan | tunnel] all}

Enables the trigger update mechanism. Triggered updates are a mechanism for immediately notifying a

router's neighbors when the router adds or deletes routes or changes their metric.

Syntax Description

Usage Guidelines

Triggered updates occur whenever a router changes the metric for a route and it is required to send an

update message immediately, even if it is not yet time for a regular update message to be sent. This will

generally result in faster convergence, but may also result in more RIPng-related traffic.

The following command enables the trigger update mechanism on all IPv6 configured interfaces:

enable ripng triggerupdate

This command was first available in ExtremeWare XOS 11.2.

Platform Availability

This command is available on all platforms.

ExtremeWare XOS 11.5 Command Reference Guide

Specifies an IPv6 configured VLAN.

Specifies an IPv6 tunnel.

Specifies all interfaces.

enable ripng triggerupdates

Extremeware xos 11.5