Configure Esrp Add Master - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ESRP Commands

configure esrp add master

configure esrp <esrpDomain> add master <vlan_name>
Description
Adds a master VLAN to an ESRP domain.
Syntax Description
esrpDomain
vlan_name
Default
N/A.
Usage Guidelines
You must configure one master VLAN for each ESRP domain. A master VLAN can belong to one ESRP
domain only. An ESRP domain contains one master and zero or more member VLANs.
The master VLAN:
Exchanges ESRP PDUs, hello messages, and data between a pair of ESRP-enabled switches.
●
Contains the total number of active physical ports that are counted when determining the master
●
ESRP domain. The switch with the highest number of active ports takes priority.
Master VLANs can have their own set of ports, and member VLANs can have a different set of ports.
The state of the ESRP device determines whether the ports in the master and member VLANs are in the
forwarding or blocking state.
Example
The following command adds the master VLAN purple to the ESRP domain esrp1:
configure esrp esrp1 add master purple
History
This command was first available in ExtremeWare XOS 11.0.
Platform Availability
This command is available on all platforms.
1242
Specifies the name of an ESRP domain.
Specifies the name of the master VLAN.
ExtremeWare XOS 11.5 Command Reference Guide