Configure Mvr Delete Receiver - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
IP Multicast Commands

configure mvr delete receiver

configure mvr vlan <vlan-name> delete receiver port <port-list>
Description
Configures a port not to receive MVR multicast streams.
Syntax Description
vlan-name
port-list
Default
N/A.
Usage Guidelines
This command is used to delete a group of virtual ports for multicast forwarding through MVR. After
using this command, the ports will revert to the default forwarding rules.
Example
The following command deletes the ports 1:1 and 1:2 of VLAN v1 to MVR for forwarding:
configure mvr vlan v1 delete receiver port 1:1-1:2
History
This command was first available in ExtremeWare XOS 11.4.
Platform Availability
This command is available on all platforms.
1806
Specifies a VLAN name.
A list of ports or slots and ports.
ExtremeWare XOS 11.5 Command Reference Guide