Extreme Networks ExtremeWare XOS Command Reference Manual page 1320

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
VRRP Commands
If you specify the
VLAN.
Example
The following command displays configuration information for the specified VRRP VLAN:
show vrrp vlan blue
The following is sample output from this command:
VLAN: blue
Priority: 1(backup)
Preempt: Yes
Virtual IP Addresses:
Tracked Pings:
Tracked IP Routes:
Tracked VLANs:
* indicates a tracking condition has failed
The following command displays statistics for VLAN vrrp-1:
show vrrp vlan vrrp-1 stats
The following is sample output from this command:
VLAN vrrp-1, VR ID 25
Chksum Err:0, Ver Err:0, VRID Err:0, Auth Mismatch:0, Pkt-len Err:0
Become Master:0, Adv recv:0, Adv Err:0, Auth Fail:0, TTL Err:0
Pri-0-recv:0, Pri-0-snt:0, Addr-List Err:0, Invalid Auth Err:0
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
1320
keyword, you see counter and statistics information for the specified VRRP
stats
VRID: 2 VRRP:
Advertisement Interval:
Authentication: None
-
-
-
Disabled State: INIT
1 sec
ExtremeWare XOS 11.5 Command Reference Guide