Show Igmp Group - Extreme Networks ExtremeWare XOS Command Reference Manual

Software version 11.5
Hide thumbs Also See for ExtremeWare XOS:
Table of Contents

Advertisement

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
IP Multicast Commands

show igmp group

show igmp group {{vlan} {<name>} | {<grpipaddress>}} {IGMPv3}
Description
Lists the IGMP group membership for the specified VLAN.
Syntax Description
grpipaddress
name
IGMPv3
Default
IGMPv2.
Usage Guidelines
If no VLAN is specified all VLANs are displayed. You can also filter the display by group address and
by multicast stream sender address.
Example
The following command lists the IGMP group membership for the VLAN accounting:
show igmp group accounting
History
This command was first available in ExtremeWare XOS 10.1.
The IGMPv3 option was added in ExtremeWare XOS 11.2.
Platform Availability
This command is available on all platforms.
1846
Specifies a group IP address.
Specifies a VLAN name.
Display the IGMP group in IGMPv3 format (if group record is IGMPv3
compatible, otherwise display in earlier format).
ExtremeWare XOS 11.5 Command Reference Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

Extremeware xos 11.5

Table of Contents