Configure Ripng Garbagetime - Extreme Networks ExtremeWare XOS Command Reference Manual

Software version 11.5

Hide thumbs Also See for ExtremeWare XOS:

Table of Contents

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.

configure ripng garbagetime

configure ripng garbagetime {<seconds>}

Configures the RIPng garbage time.

Syntax Description

Specifies a time in seconds. Range is 10 to 2400 seconds.

120 seconds.

Usage Guidelines

This command configures the time interval after which a route in the RIPng routing database that has

expired will be removed. The value is rounded off to nearest multiple of 10.

The following command configures the RIPng garbage time to have a 60-second delay:

configure ripng garbagetime 60

This command was first available in ExtremeWare XOS 11.2.

Platform Availability

This command is available on all platforms.

ExtremeWare XOS 11.5 Command Reference Guide

Do you have a question about the ExtremeWare XOS and is the answer not in the manual?

Extremeware xos 11.5