Configure Netlogin Local-User - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
Network Login Commands

configure netlogin local-user

configure netlogin local-user <user-name> {vlan-vsa [[{tagged | untagged}
[<vlan_name>] | <vlan_tag>]] | none]}
Description
Configures an existing local netlogin account.
Syntax Description
user-name
tagged
untagged
vlan_name
vlan_tag
none
Default
N/A.
Usage Guidelines
Use this command to modify the attributes of an existing local netlogin account. You can update the
following attributes associated with a local netlogin account:
Password of the local netlogin account
●
Destination VLAN attributes including: adding clients tagged or untagged, the name of the VLAN,
●
and the VLAN ID
NOTE
Passwords are case-sensitive and must have a minimum of 1 character and a maximum of 32 characters.
You must create a local netlogin account before using this command. To create a local netlogin user
name and password, use the following command:
create netlogin local-user <user-name> {encrypted <password>} {vlan-vsa [[{tagged |
untagged} [<vlan_name>] | <vlan_tag>]]}
If the switch displays a message similar to the following:
* SummitX450.14 # configure netlogin local-user purplenet
%% Invalid input detected at '^' marker.
1062
Specifies the name of an existing local netlogin account.
Specifies that the client be added as tagged.
Specifies that the client be added as untagged.
Specifies the name of the destination VLAN.
Specifies the VLAN ID, tag, of the destination VLAN.
Specifies that the VSA 211 wildcard (*) is applied, only if you do not specify
tagged or untagged
^
ExtremeWare XOS 11.5 Command Reference Guide