Configure Iproute Ipv6 Priority - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
IPv6 Unicast Commands

configure iproute ipv6 priority

configure iproute ipv6 priority [ripng | blackhole | icmp | static |
ospfv3-intra | ospfv3-inter | ospfv3-as-external | ospfv3-extern1 | ospfv3-
extern2] <priority>
Description
Changes the priority for all routes from a particular route origin.
Syntax Description
ripng
icmp
blackhole
static
ospfv3-intra
ospfv3-inter
ospfv3-as-external
ospfv3-extern1
ospfv3-extern2
priority
Default
Table 31 lists the relative priorities assigned to routes depending upon the learned source of the route.
Table 31: Relative route priorities
Route Origin
Direct
BlackHole
Static
ICMP
OSPF3Intra
OSPF3Inter
RIPg
OSPFv3 ASExt
OSPFv3 Extern1
OSPFv3 Extern2
1428
Specifies RIPng.
Specifies ICMP.
Specifies the blackhole route.
Specifies static routes.
Specifies OSPFv3 Intra routing.
Specifies OSPFv3 Inter routing.
Specifies OSPFv3 as External routing.
Specifies OSPFv3 External 1 routing.
Specifies OSPFv3 External 2 routing.
Specifies a priority number in the range of 11 to 65534.
Priority
10
50
1100
1200
2200
2300
2400
3100
3200
3300
ExtremeWare XOS 11.5 Command Reference Guide