Enable Esrp - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.

enable esrp

enable esrp <esrpDomain>
Description
Enables ESRP for a named domain.
Syntax Description
esrpDomain
Default
Disabled.
Usage Guidelines
Before you enable an ESRP domain, it must have a domain ID. The ESRP domain ID is determined from
one of the following user-configured parameters:
ESRP domain number created with the
●
802.1Q tag (VLANid) of the tagged master VLAN
●
If you do not have a domain ID, you cannot enable ESRP on that domain. A message similar to the
following appears:
ERROR: Cannot enable ESRP Domain "esrp1" ; No domain id configured!
If you add an untagged master VLAN to the ESRP domain, make sure to create an ESRP domain ID
with the
configure esrp domain-id
Example
The following command enables ESRP for the domain esrp1:
enable esrp esrp1
History
This command was first available in ExtremeWare XOS 11.0.
Platform Availability
This command is available on all platforms with an Advanced Edge, a Core, or an Advanced Core
license.
ExtremeWare XOS 11.5 Command Reference Guide
Specifies the name of an ESRP domain.
configure esrp domain-id
command before you attempt to enable the domain.
enable esrp
command
1289