Enable Cna-Testplug - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.

enable cna-testplug

enable cna-testplug
enable cna-testplug
Description
Enables the CNA Agent (test plug). Once enabled, the CNA Agent coordinates with the CNA Server to
test the network for throughput.
Syntax
This command has no arguments or variables.
Default
Disabled.
Usage Guidelines
If you previously configured the IP address for the CNA Server and the VLAN interface, the CNA
Agent immediately registers with the CNA Server upon being enabled and begins running the
requested tests.
Example
The following command enables the CNA Agent:
enable cna-testplug
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on all platforms.
1999
ExtremeWare XOS 11.5 Command Reference Guide