Configure Netlogin Add Mac-List - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
Network Login Commands

configure netlogin add mac-list

configure netlogin add mac-list [<mac> {<mask>} | default] {encrypted}
{<password>} {ports <port_list>}
Description
Adds an entry to the MAC address list for MAC-based Network Login.
Syntax Description
mac
mask
default
encrypted
password
ports
Default
If no password is specified, the MAC address will be used.
Usage Guidelines
Use this command to add an entry to the MAC address list used for MAC-based Network Login.
If no match is found in the table of MAC entries, and a default entry exists, the default will be used to
authenticate the client. All entries in the list are automatically sorted in longest prefix order.
Associating a MAC Address to a Port. You can configure the switch to accept and authenticate a client
with a specific MAC address. Only MAC addresses that have a match for the specific ports are sent for
authentication. For example, if you associate a MAC address with one or more ports, only
authentication requests for that MAC addresses received on the port(s) are sent to the RADIUS server.
The port(s) block all other authentication requests that do not have a matching entry. This is also known
as secure MAC.
To associate a MAC address with one or more ports, specify the
configure netlogin add mac-list [<mac> {<mask>} | default] {encrypted} {<password>}
{ports <port_list>}
You must enable MAC-based netlogin on the switch and the specified ports before using this command.
If MAC-based netlogin is not enabled on the specified port(s), the switch displays a warning message
similar to the following:
WARNING: Not all specified ports have MAC-Based NetLogin enabled.
If this occurs, make sure to enable MAC-based netlogin.
1052
Specifies the MAC address to add.
Specifies the number of bits to use for the mask.
Specifies the default entry.
Used to display encrypted form of password in configuration files. Do not use.
Specifies the password to send for authentication.
Specifies the port or port list to use for authentication.
command.
option when using the
ports
ExtremeWare XOS 11.5 Command Reference Guide