Unconfigure Pim Ssm Range - Extreme Networks ExtremeWare XOS Command Reference Manual

Software version 11.5

Hide thumbs Also See for ExtremeWare XOS:

Table of Contents

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.

IP Multicast Commands

unconfigure pim ssm range

Unconfigures the range of multicast addresses for PIM SSM.

Syntax Description

This command has no arguments or variables.

By default, no SSM range is configured.

Usage Guidelines

You must disable PIM before configuring or unconfiguring a PIM-SSM range. Use the

Initially, no range is configured for SSM. After a range is configured, you can remove the range with the

unconfigure pim ssm range command.

When no range is configured for PIM SSM, the switch will not use PIM SSM for any multicast groups.

The following command removes the PIM SSM range:

unconfigure pim ssm range

This command was first available in ExtremeWare XOS 11.4.

Platform Availability

This command is available on all platforms.

ExtremeWare XOS 11.5 Command Reference Guide

Extremeware xos 11.5