Configure Iparp Delete Proxy - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
IP Unicast Commands

configure iparp delete proxy

configure iparp delete proxy [[<ipNetmask> | <ip_addr> {<mask>}] {vr
<vr_name>} | all]
Description
Deletes one or all proxy ARP entries.
Syntax Description
ipNetmask
ip_addr
mask
all
vr_name
Default
If you do not specify a virtual router, the current virtual router context is used.
Usage Guidelines
When the
mask
Example
The following command deletes the IP ARP proxy entry 100.101.45.0/24:
configure iparp delete proxy 100.101.45.0/24
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
1334
Specifies an IP address/mask length.
Specifies an IP address.
Specifies a subnet mask.
Specifies all ARP entries.
Specifies a VR name.
is not specified, the software will assume a host address (that is, a 32-bit mask).
ExtremeWare XOS 11.5 Command Reference Guide