Show Mld Group - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.

show mld group

show mdl group {{vlan} {<name>} | {<v6grpipaddress>}} {MLDv2}
Description
Lists the MLD group membership for the specified VLAN.
Syntax Description
v6
grpipaddress
name
MLDv2
Default
MLDv1.
Usage Guidelines
If no VLAN is specified all VLANs are displayed. You can also filter the display by group address and
by multicast stream sender address.
Example
The following command lists the MLD group membership for the VLAN accounting:
show mld group vtest3
Output from this command looks similar to the following:
Group Address
ff03::1:1
ff03::1:2
ff02::1:ff22:124
ff05::a:abcd
ff05::a:abce
ff02::1:ff22:112
ff02::1:ff1f:a418
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on all platforms.
ExtremeWare XOS 11.5 Command Reference Guide
Specifies a group IPv6 address.
Specifies a VLAN name.
Display the MLD group in MLDv2 format (if group record is MLDv2 compatible,
otherwise display in earlier format).
Ver Vlan
1 vtest3
1 vtest3
1 vtest3
1 vtest3
1 vtest3
1 vtest3
1 vtest3
Port Age
4:5 25
4:5 25
4:45 26
4:15 23
4:15 23
4:45 26
4:45 26
show mld group
1887