Disable Log Debug-Mode - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
Troubleshooting Commands

disable log debug-mode

disable log debug-mode
Description
Disables debug mode. The switch stops generating debug events.
Syntax Description
This command has no arguments or variables.
Default
Disabled.
Usage Guidelines
This command disables debug mode. Debug mode must be enabled prior to configuring advanced
debugging capabilities. These include allowing debug messages, which can severely degrade
performance. For typical network device monitoring, debug mode should remain disabled, the default
setting. Debug mode should only be enabled when advised by technical support, or when advanced
diagnosis is required. The debug mode setting is saved to FLASH.
The following configuration options require that debug mode be enabled:
Including a severity of
●
Target format options
●
Example
The following command disables debug mode:
disable log debug-mode
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
1960
,
debug-summary debug-verbose
,
process-name process-id
, or when configuring filters
debug-data
, , and
source-function
ExtremeWare XOS 11.5 Command Reference Guide
source-line