Extreme Networks ExtremeWare XOS Command Reference Manual page 1286

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ESRP Commands
On switches with an Edge license, only ESRP-aware functionality is supported; you cannot enable the
ESRP domain. On switches with an Advanced Edge, a Core, or an Advanced Core license, you can
configure switches as ESRP-aware or with full ESRP functionality. If you need an ESRP-aware switch,
do not enable the ESRP domain.
For more information about configuring ESRP-aware switches, see the Chapter 22, "Extreme Standby
Router Protocol," in the ExtremeWare XOS Concepts Guide.
Example
The following command creates ESRP domain esrp1 on the switch:
create esrp esrp1
History
This command was first available in ExtremeWare XOS 11.0.
Platform Availability
This command is available on all platforms.
1286
ExtremeWare XOS 11.5 Command Reference Guide