Disable Ospf Restart-Helper-Lsa-Check - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.

disable ospf restart-helper-lsa-check

disable ospf [vlan [all | <vlan-name>] | area <area-identifier> | virtual-
link <router-identifier> <area-identifier>] restart-helper-lsa-check
Description
Disables the restart helper router from terminating graceful OSPF restart when received LSAs would
affect the restarting router.
Syntax Description
vlan-name
all
area-identifier
router-identifier
Default
The default is enabled.
Usage Guidelines
This command disables the restart helper router from terminating graceful OSPF restart when received
LSAs would affect the restarting router.
Example
The following command disables a router from terminating graceful OSPF restart for all routers in area
10.20.30.40 if it receives an LSA that would affect routing:
disable ospf area 10.20.30.40 restart-helper-lsa-check
History
This command was first available in ExtremeWare XOS 11.3.
Platform Availability
This command is available on all platforms.
ExtremeWare XOS 11.5 Command Reference Guide
Specifies a VLAN name.
Specifies all VLANs
Specifies an OSPF area.
Specifies the router ID of the remote router of the virtual link.
disable ospf restart-helper-lsa-check
1583