Create Ospfv3 Area - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
OSPFv3 Commands

create ospfv3 area

create ospfv3 {domain <domainName>} area <area-identifier>
Description
Creates an OSPFv3 area.
Syntax Description
domainName
area-identifier
Default
Area 0.0.0.0
Usage Guidelines
Area 0.0.0.0 does not need to be created. It exists by default.
Example
The following command creates a non-backbone OSPFv3 area:
create ospfv3 area 1.2.3.4
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on platforms with a Core or an Advanced Core license.
1640
Specifies an OSPFv3 domain. OSPF-Default is the only one currently
supported.
Specifies an OSPFv3 area, a four-byte, dotted decimal number.
ExtremeWare XOS 11.5 Command Reference Guide