Show Diagnostics - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.

show diagnostics

show diagnostics {slot [<slot> | A | B]}
Description
Displays the status of the last diagnostic test run on the switch.
Syntax Description
slot
A | B
Default
N/A.
Usage Guidelines
Use this command to display information from the last diagnostic test run on the switch.
Output on the BlackDiamond 10808 and BlackDiamond 12804 Switches. The switch displays the following
diagnostic information:
Type of slot—The slot where the diagnostic test was run: I/O or MSM.
●
Slot number—The number of the slot where the diagnostic test was run.
●
Date the test was run—The day, month, date, time, and year the test was run.
●
Temperature—The temperature of the module, in celsius, when the test was run.
●
Test data—More detailed information about the test, which includes the:
●
Version number of the diagnostic test run.
■
Serial number of the module where the test was run.
■
Type of tests run and if they passed or failed (CPU, register, memory, and system).
■
Summary—A brief summary of the overall diagnostic test. Options are:
●
Diagnostics Pass—The diagnostic test has passed.
■
Diagnostics Fail—One or more diagnostic test has failed.
■
ExtremeWare XOS 11.5 Command Reference Guide
Specifies which I/O module to display diagnostic status information on.
NOTE: This parameter is available only on modular switches.
Specifies which MSM to display diagnostic status information on:
• A specifies the MSM installed in slot A.
• B specifies the MSM installed in slot B.
NOTE: This parameter is available only on modular switches.
show diagnostics
1977