ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
show tacacs-accounting
show tacacs-accounting
Description
Displays the current TACACS+ accounting client configuration and statistics.
Syntax Description
This command has no arguments or variables.
Default
N/A.
Usage Guidelines
The output of this command displays the following information:
TACACS+ Accounting—The current state of TACACS+ accounting, enabled or disabled.
●
TACACS+ Accounting Server Connect Timeout—The amount of time configured to detect and
●
recover from a TACACS+ server failure.
Primary TACACS+ Accounting Server—Describes information about the primary TACACS+
●
accounting server, including:
The name of the primary TACACS+ accounting server
■
The IP address of the primary TACACS+ accounting server
■
The TCP port to use to contact the primary TACACS+ accounting server
■
The IP address and VR used by the switch
■
The shared secret configured for the primary TACACS+ accounting server
■
Secondary TACACS+ Accounting Server—Contains the same type of output as the primary
●
TACACS+ accounting server for the secondary TACACS+ accounting server, if configured.
Example
The following command displays TACACS+ accounting client configuration and statistics:
show tacacs-accounting
The following is sample output of this command:
TACACS+ Accounting : enabled
TACACS+ Acct Server Connect Timeout sec: 3
Primary TACACS+ Accounting Server:
Server name
:
IP address
:
Server IP Port:
Client address:
Shared secret :
Secondary TACACS+ Accounting Server:Not configured
ExtremeWare XOS 11.5 Command Reference Guide
10.201.31.238
49
10.201.31.85 (VR-Default)
qijxou
show tacacs-accounting
1033