Show Dos-Protect - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
Security Commands

show dos-protect

show dos-protect {detail}
Description
Displays DoS protection configuration and state.
Syntax Description
detail
Default
N/A.
Usage Guidelines
Use this command to display the DoS protection settings. Using the
following cumulative statistics:
trusted
●
notify
●
alerts
●
Example
The following command displays the DoS protection settings for the switch:
show dos-protect
The following is sample output from this command:
dos-protect is disabled
dos-protect settings:
interval:
acl expire time:
trusted ports:
no trusted ports configured
type L3-Protect:
notify threshold:
alert threshold:
1022
Specifies to display statistics in addition to configuration and state.
1 (measurement interval secs)
5 (secs)
3500 (level to log a message)
4000 (level to generate an ACL)
option will also display the
detail
ExtremeWare XOS 11.5 Command Reference Guide