Show Radius - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
Security Commands

show radius

show radius {mgmt-access | netlogin}
Description
Displays the current RADIUS client configuration and statistics.
Syntax Description
mgmt-access
netlogin
Default
N/A.
Usage Guidelines
If you do not specify a keyword, configuration details related to both management and network login
are displayed. The output from this command displays the status of RADIUS and RADIUS accounting
(enabled or disabled) and the primary and secondary servers for RADIUS and RADIUS accounting.
Use the
mgmt-access
access.
Use the
netlogin
Example
The following command displays the current RADIUS client configuration and statistics for both
management and network login:
show radius
The following is sample output from this command:
Switch Management Radius: enabled
Switch Management Radius server connect time out: 3 seconds
Switch Management Radius Accounting: disabled
Switch Management Radius Accounting server connect time out: 3 seconds
Netlogin Radius: enabled
Netlogin Radius server connect time out: 3 seconds
Netlogin Radius Accounting: disabled
Netlogin Radius Accounting server connect time out: 3 seconds
Primary Switch Management Radius server:
Server name
1024
Specifies configuration and statistics for the switch management RADIUS
authentication server.
Specifies configuration and statistics for the network login RADIUS
authentication server.
keyword to display only RADIUS configuration details related to management
keyword to only RADIUS configuration details related to network login.
:
ExtremeWare XOS 11.5 Command Reference Guide