IGP Commands
configure rip updatetime
configure rip updatetime {<seconds>}
Description
Specifies the time interval in seconds within which RIP sends update packets.
Syntax Description
seconds
Specifies a time in seconds.
Default
30 seconds.
Usage Guidelines
The router exchanges an update message with each neighbor every 30 seconds (default value), or if
there is a change to the overall routed topology (also called triggered updates). The timer granularity is 10
seconds.
Example
The following command sets the update timer to 60 seconds:
configure rip updatetime 60
History
This command was available in ExtremeWare 2.0.
Platform Availability
This command is available on all platforms.
1322
ExtremeWare Software 7.3.0 Command Reference Guide