Enable Radius-Accounting - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.

enable radius-accounting

enable radius-accounting {mgmt-access | netlogin}
Description
Enables RADIUS accounting.
Syntax Description
mgmt-access
netlogin
Default
RADIUS accounting is disabled for both switch management and network login by default.
Usage Guidelines
The RADIUS client must also be enabled.
Before you enable RADIUS accounting on the switch, you must configure the servers used for
accounting and configure the authentication string (shared secret) used to communicate with the
RADIUS accounting server.
To configure the RADIUS accounting servers, use the following command:
configure radius-accounting {mgmt-access | netlogin} [primary | secondary] server
[<ipaddress> | <hostname>] {<tcp_port>} client-ip [<ipaddress>] {vr <vr_name>}
To configure the shared secret, use the following command:
configure radius-accounting {mgmt-access | netlogin} [primary | secondary] shared-
secret {encrypted} <string>
If you do not specify a keyword, RADIUS accounting is enabled on the switch for both management
and network login.
Use the keyword to enable RADIUS accounting for switch management functions.
mgmt-access
Use the keyword to enable RADIUS accounting for network login.
netlogin
Example
The following command enables RADIUS accounting on the switch for both management and network
login:
enable radius-accounting
ExtremeWare XOS 11.5 Command Reference Guide
Specifies the switch management RADIUS accounting server.
Specifies the network login RADIUS accounting server.
enable radius-accounting
1009