Feature Reference; Overview - Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions

Feature Reference

Overview

This chapter provides reference information for programming and using system
features. Features are listed in alphabetical order. System Programming
procedures include the procedure code (# and three-digit number) in the heading;
dial-code features include the feature code (F for
two- or three-digit code). Headings without codes are general call-handling topics
or Telephone Programming procedures.
Each feature includes the following information, if applicable:
Description
Examples
Related Features
Programming
Considerations
Using
Valid Entries (
This chapter gives step-by-step instructions, using the following conventions:
All of the instructions in this chapter assume that system phones select
outside lines or pools first and standard phones select intercomStandard
phones; Automatic Line Selection for first (as determined by each
extension's setting for Automatic Line Selection).
See Chapter 2
in programming mode.
Programming instructions tell you to use the
values for specific settings. You can, however, enter a value using the
dialpad if you prefer. Similarly, there are different ways to exit programming
mode as described in
comfortable.
= factory setting)
for a review of the methods and buttons you can use while
Chapter 2—use the method with which you are most
5
f i
or I for , plus a
D
button to change
5-1