Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions page 143

Calls answered by Automatic System Answer in Hold Mode are not logged
by the Caller ID Logging and Dialing feature at extension 10 unless
extension 10 is programmed to log answered calls using Caller ID Log
Answered Calls (#317).
Direct Extension Dial is an alternative system answering feature that lets
outside callers dial an extension or Hunt Group number directly, without the
aid of the receptionist.
Considerations
The Automatic System/Direct Extension Dial PC card is purchased
separately and must be installed (see " PARTNER ACS PC Card
Installation Instructions ") .
Use the Automatic System Answer Record/Playback feature to record a
message before using Automatic System Answer since there is no default
message.
An Automatic System Answer button must be programmed on a button
with lights on the system display phone at extension 10. (This feature will
not work if it is programmed on a button without lights.)
Automatic System Answer can handle up to three outside calls
simultaneously.
Valid Entries
1 = Assigned
2 = Not Assigned
3 =Select button (then press a programmable button to assign Automatic System
Answer to that button)
(See Figure 2-3 on page 2-23
s
such as
To assign or unassign an Automatic System Answer button with lights at
extension 10:
1. Press
2. If you want to assign Automatic System Answer to the first available button,
press until a display similar to the following appears:
ASA Button
1 Assigned - Ext10
If you want to unassign Automatic System Answer, press
display similar to the following appears:
ASA Button
2 Not Assigned
5-28
Feature Reference
for the location of special programming buttons
e
and on system phones.)
f0 0 s s# 1 1 1
.
D
until a