Copy Settings (#399) - Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions

Copy Settings (#399)

Description
This System Programming procedure copies all of the following settings from one
extension to another:
#301 Line Assignment
#302 Line Access Restriction
#303 Display Language
#304 Automatic Extension Privacy
#305 Abbreviated Ringing
#307 Forced Account Code Entry
#308 Distinctive Ring
#309 Intercom Dial Tone
#310 Automatic VMS Cover
#311 External Hotline
#312 Voice Interrupt On Busy Automatic
#313 Line Access Mode Line Ringing
#314 Pool Extension Assignment
Considerations
This procedure is skipped in the sequence of programming procedures
when cycling. To use this procedure, enter the code (#399) directly.
For each type of phone, program one extension, then use this procedure to
copy the programming from that extension to the others with the same
number of line or pool buttons (for example, from a PARTNER-18D phone
to a PARTNER-18 phone).
Pooled extension settings can be copied to key extensions, except for
extension 10. Key extension settings can be copied to pooled extensions.
Programming
(See Figure 2-3 on page 2-23
s
such as
To copy the programmed settings from one extension to another of the same type:
1. Press
10 or 11.
5-90
Feature Reference
#315 Pool Access Restriction
#316 Call Waiting
#317 Caller ID Call Logging and Dialing
#318 Caller ID Log Answered Calls
#401 Outgoing Call Restriction
#405 Disallowed List Assignments
#408 Allowed List Assignments
#501 Pickup Group Extensions
#502 Calling Group Extensions
#504 Night Service Group
#505 Hunt Group Extensions
#601 Fax Machine Extensions
#607 AA Extensions
#612 Contact Closure Group
Automatic Line Selection
Line Ringing
for the location of special programming buttons
e
and on system phones.)
f 0 0 s s # 3 9 9
at extension