Voice Interrupt On Busy Talk-Back (F18) - Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions

Voice Interrupt On Busy Talk-Back (F18)

Description
This feature is available only on system phones.
This feature lets you program a button that is used to respond to a voice interrupt
on busy call while the user is active on another call.
Related Procedures
You must use Voice Interrupt On Busy (#312) to identify extensions that can
receive an intercom call while busy on another call.
Considerations
Voice Interrupt On Busy Talk-Back must be programmed on a button with lights.
This feature will not work if it is programmed on a button without lights.
Programming
(See Figure 2-3 on page 2-23
s
such as and
1. Press
2. Enter the number of the extension to be programmed with this feature.
3. Press a programmable button with lights.
4. Press
5. Program another button for this extension or exit programming mode.
Using
To respond to a voice interrupt on busy call (you hear two beeps and the
originator's voice—be aware that the third party to whom you are speaking
probably also will hear the two beeps and the faint sound of the originator's voice):
1. Ask the party with whom you are speaking to hold, but do not put the call
on hold.
2. Press the Voice Interrupt On Busy Talk-Back button.
The green light next to the Voice Interrupt On Busy Talk-Back button turns
on. Voice Interrupt On Busy Talk-Back is activated.
3. Respond to the originator of the voice interrupt on busy call.
The third party with whom you were originally speaking does not hear your
response, but you can hear that third party.
5-276
Feature Reference
for the location of special programming buttons
e
on system phones.)
f 0 0 s s c
at extension 10 or 11.
f 1 8
.